Guide

How to Dispose of an Old Battery Charger

Updated on · By the Drive Jumper team

Take an old battery charger to a household hazardous waste site or an e-waste recycler, not the curbside bin. Most chargers contain copper and plastic worth recovering, and some have a small lithium coin cell or a capacitor inside.

On this page (9 sections)
  1. Does an old battery charger go in the trash or the recycling?
  2. How can you tell whether the charger still works?
  3. How do you recycle a battery charger step by step?
  4. Where can you drop off an old charger near you?
  5. What about the batteries and cables that came with it?
  6. Can you reuse or pass on a charger instead of recycling it?
  7. How do you store chargers you keep so they last?
  8. How is an old charger different from a trickle charger or maintainer?
  9. What should you do first when you clear out old chargers?

Take an old battery charger to a household hazardous waste site or an e-waste recycler, not the curbside bin. Most chargers contain copper and plastic worth recovering, and some have a small lithium coin cell or a capacitor inside.

The good news is that getting rid of one is quick once you know where it goes. Below is the order to do it in: check whether it still works, separate any battery, then hand the whole unit to the right drop-off.

Does an old battery charger go in the trash or the recycling?

Neither, in most places. A charger is e-waste: cords, a circuit board, copper windings and a plastic shell.

Curbside recycling plants sort bottles and paper, and a charger's cable wraps around the machinery.

Household hazardous waste (HHW) sites and e-waste recyclers take chargers and pull out the metals. Many counties run free collection days, and some hardware and electronics stores keep a drop-off bin near the entrance.

If your area has no HHW site, a scrap metal yard often accepts chargers for the copper. Call first and ask whether they take small electronics, since policies vary by yard.

The materials are the reason not to bin it. A charger's copper windings and its plug prongs are the metal a recycler actually wants, and the plastic shell can be reground.

A circuit board adds a small amount of solder and other metals on top of that. None of this belongs in a landfill when a recycler can separate it.

How can you tell whether the charger still works?

Test it on a device you don't mind risking before you decide to bin it. Plug the charger into a wall outlet away from water, connect it to a cheap or spare device, and watch for a light or a charge reading.

A charger that gets hot, smells burnt, buzzes loudly or has a frayed cable near the plug is a hazard. Stop using it and recycle it.

If the output voltage and connector match a device you still own, the charger may be worth keeping as a spare. A second charger for a laptop or drill battery is handy to have in a bag or at a second desk.

Reading the label before you decide

The label on the charger tells you most of what you need to know. Look for the output voltage and the current rating, printed as something like 12V 2A.

Then compare that to what the device asks for on its own label or its manual.

A charger rated for the same voltage but a lower current will charge slowly, which is fine for an overnight top-up. One rated for a higher current may be too much for a small device.

The connector shape matters too, so check the barrel size or the plug type before you plan to reuse it.

If the label is worn off or missing, treat the charger as unknown. Don't pass it on to anyone, and recycle it with the rest.

How do you recycle a battery charger step by step?

Unplug it, let it cool, then sort the parts and take the whole charger to one drop-off. Here is the order that avoids a wasted trip.

  1. Unplug the charger at the wall and the device end, and let it sit until it's cool.
  2. Check for a built-in battery, a coin cell in the housing or a removable battery pack.
  3. Coil the cable loosely and secure it with a twist tie so it doesn't tangle in a bin.
  4. Bag any loose battery separately and label it.
  5. Find your nearest e-waste or HHW site and confirm its hours and what it accepts.
  6. Hand over the charger and the batteries at the same visit if the site takes both.

Don't cut the cord, don't smash the housing and don't burn it. Each of those steps spreads the materials you're trying to recover.

Where can you drop off an old charger near you?

Start with your county's waste department, then try a retailer. These are the usual places that accept chargers:

  • Household hazardous waste sites, often run by the county or city.
  • E-waste collection events, common in spring and fall.
  • Big-box electronics and hardware stores with a recycling bin.
  • Scrap metal yards that buy copper and small electronics.
  • Manufacturer take-back programs for power tools and laptops.

Call or check the website before you go. Some sites take chargers only on certain days, and some limit how much you can bring per visit.

If you're clearing out a garage, gather all the old chargers, cables and dead batteries in one box first. A single trip for the whole pile saves time and fuel.

What to ask before you drive over

A short call saves the trip. Ask three things: does the site take chargers, does it take loose batteries in the same visit, and is there a limit per household.

Ask whether the site takes the whole charger with the cord attached. Most do, but a few want cables separated from the units.

Ask about hours too, since many HHW sites open only on set weekends and close early in winter.

If a retailer bin is your only option, ask whether the bin is for small electronics or for batteries only. A battery bin won't take the charger body, and dropping it there just leaves a mess for staff.

What about the batteries and cables that came with it?

Handle each part by its own rule. A charger's cable is e-waste like the charger, so keep it with the unit.

Loose batteries are the bigger concern. Rechargeable lithium-ion and nickel-metal hydride packs go to a battery recycler or HHW site.

Button and coin cells go the same way, because they can short and spark in a trash truck. Standard alkaline batteries in many areas can go in the trash, but a battery recycler is still the cleaner choice.

Wrap the terminals of any lithium pack with tape before bagging it. That one step prevents the most common cause of small fires at recycling centers.

Can you reuse or pass on a charger instead of recycling it?

Yes, and it's the best option when the charger still works. Reuse keeps the copper and plastic in service and saves a new purchase.

  • Give it to a neighbor or a friend with a matching device.
  • Offer it in a local buy-nothing group or a second-hand shop.
  • Donate power tool chargers to a tool library or a repair cafe.
  • Keep it as a spare for a device you still use.

Match the connector and the voltage before you pass it on. A charger with the wrong polarity or voltage can damage a device, so label it with what it charges.

If you're unsure whether a charger still works, say so when you pass it on. That's fairer than handing over a charger that might fail.

Labelling a charger you pass on

Write the device name and the output voltage on a strip of tape and stick it to the charger body. A spare charger with a clear label is easy to match and hard to mistake for junk.

Add the connector size if it's a barrel plug. If you keep the charger, put the same label on it and store it with its device.

A labelled charger stays in service longer, and a drawer of unlabelled ones is how good chargers end up in the recycle box by mistake.

How do you store chargers you keep so they last?

Keep them dry, untangled and cool. A charger that's stored well is less likely to end up as e-waste next year.

Coil cables loosely rather than wrapping them tight around the body, which strains the wire at the plug. Store chargers in a dry box or drawer, away from damp basements and hot garages.

Label each charger with the device it serves. A matching label stops mix-ups and keeps the right charger with the right tool.

If you run several chargers for a workshop or a truck, a 10 amp battery charger gives you a faster, dedicated unit instead of a drawer full of odd adapters. For a truck that sits for weeks, a battery charger for diesel truck keeps the starting battery topped up without pulling it out.

How is an old charger different from a trickle charger or maintainer?

A basic charger just pushes current; a maintainer holds a battery at a set voltage for long storage. That difference decides what you keep and what you recycle.

An old wall-wart charger for a cordless tool or a phone often has no smart cutoff. A maintainer watches the voltage and stops or slows charging when the battery is full, so it can stay connected for months.

Our guide to trickle charger vs battery maintainer explains which one suits long storage.

When you buy a replacement, match the connector and voltage to the device before you plug it in. Our walkthrough on how to connect a battery charger to a battery covers the terminal order and the safety checks.

What should you do first when you clear out old chargers?

Sort first, recycle second, and only then buy a replacement. Check each charger for a built-in battery and set those aside.

Test the ones that might still work and pass on the good ones. Then take the rest to an e-waste or hazardous waste site in one trip.

Knowing how to dispose of an old battery charger comes down to a simple rule: if it works, give it away; if it doesn't, recycle it as e-waste. Never put it in the trash or the curbside bin.

With the batteries separated and the cable coiled, the whole job takes one trip and a few minutes.

Frequently asked questions

Can I put a battery charger in my recycling bin?

No. Curbside recycling is built for bottles, cans and paper, and a charger's cords and circuit board jam the sorting machines.

Take it to an e-waste drop-off or a household hazardous waste site instead.

Does it cost anything to recycle a charger?

Usually not. Most municipal e-waste events and retailer drop-off bins are free, though a few hazardous waste sites charge a small fee or limit visits per household.

Check your county's page before you drive over.

What should I do with a charger that still works?

Keep it or pass it on before recycling. A working charger has value to a neighbor, a tool library or a second-hand shop, and giving it away keeps useful copper and plastic in service longer.

How do I get rid of the battery inside a charger?

Treat it as a separate item. Button cells and coin batteries go to a battery recycler or hazardous waste site, never the trash, because they can spark in a truck.

Many chargers have no battery at all, so check before you plan the trip.

Can I cut the cord off and bin the rest?

Don't. The cord and the body both hold metal and plastic that recyclers want, and cutting a cord leaves a sharp end.

Take the whole charger in as one item.